Fab Tech

Fabrication Technology Associates, Inc.
PO Box 2309, Crosby, TX 77532
Phone: (281) 328-3700   Fax: (281) 328-3722
Email or Fax Your Machinery Requirements
Autogauge CNC1000 Control
The CNC1000 Control can store up to 1000 bends or 500 jobs.
Bends can be preformed one dimension at a time using the manual mode or sequentially in the automatic mode as the backgauge repositions after each ram cycle.

A retract can be programmed between sequential bends to move the backgauge out of the way on reverse bends or a delay can be programmed to allow the operator time to reposition the work piece. The bend allowance can be programmed for each job to apply to all bends within that job.

This system can be equipped with an optional:
Ram Axis
"R" axis on the backgauge
Front Gauge
Control Features:
Memory: 1000 Stations, 500 Jobs
Battery Backup for 30 Days
Flange Resolution:  0.001" (.03mm)
Angle Resolution:  0.1 Degrees
Display shows Flange and Ram Position
IN/MM Conversion
Ram Axis programmesd in Depth or Angle Mode
Delay and Retract for Backgauge
Entry for Bend Allowance
Can be supplied with the following Backgauges:
A, B, HD, TD, & G48
Can be supplied with Press Brake Front Gauging System
Single or Dual Drive