Fab Tech Fabrication Technology Associates, Inc. PO Box 2309, Crosby, TX 77532 Phone: (281) 328-3700   Fax: (281) 328-3722

Email or Fax Your Machinery Requirements

ATS 560 CNC Control

ATS 560 Three Axis CNC Control for medium production bending operations that need performance at low cost The ATS 560 has two (2) work modes

(1)Manual mode: The operator enters a backstop dimension and a depth dimension. Both axis then position automatically to the entered values. The required tonnage can be entered to protect the machine against overloads. On the display, you will see the back gauge and depth stop dimensions and tonnage readout. (2)Automatic Mode The operator can enter several backstop and depth dimensions up to a total of 400 steps. When the program is run, the control will sequence through the steps of the program. The operator can follow the different steps on the display of the control. TDC (fast-slow point) can be changed in each step of the program.

Includes: -Electronic digital read out. -Automatic back gauge positioning (X-axis) -Automatic depth positioning  (Y-axis) -Ram repeatability+/- 0.0004" -Back gauge repeatability+/- 0.004" -Back gauge range   26" on 45 - 75 Ton Machines -Back gauge range   31" on 120 to 330 Ton Machines -Jog Mode -Memory:  200 programs with 400 steps -Position speed 355 IPM -Electronic pressure (tonnage) adjustment and readout -Electronic part counter -Programmable speed change-over point -Programmable stroke -Teach-In on Depth